Turbosmart BLOW OFF VALVES - Race Port – Universal – New for User Manual
Browse online or download User Manual for For the car Turbosmart BLOW OFF VALVES - Race Port – Universal – New for . Turbosmart BLOW OFF VALVES - Race Port – Universal – New for 2011 User Manual
- Page / 3
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1
------------------------------------------------------------------------------------------------------------------------
IMPORTANT NOTES ON YOUR RACE PORT
Use only silicone hose that is the correct size and pressure/vacuum rating for your application when fitting your Race Port
Ensure that all plumbing is secured with suitable clamps or the correct fittings are used
Your Race Port should be mounted at least 100mm from any high heat source or adequately shielded
Check the vacuum level produced by your engine to ensure the right spring is installed in your Race Port for maximum response
RECOMMENDATIONS
Turbosmart recommends that your Race Port is fitted and adjusted by an appropriately qualified technician
------------------------------------------------------------------------------------------------------------------------
HOW TO INSTALL YOUR RACE PORT
Allow the engine to cool down before installing your Race Port
Identify a suitable location along the intercooler/intake piping for the Race Port – this will need to be between the outlet of the turbo
and the throttle body ideally between the throttle body and the intercooler
Remove the Race port from the weld on adapter by removing the V-Band clamp. The V-band clamp is removed by opening the
screw until it has reached the end stop, then pushing the head of the screw in a “syringe” like motion and lifting the Race Port off
the weld flange.
Step 1: Step 2: Step 3:
Weld the adapter onto the intake pipe in your ideal position, then allow the adapter to cool down
Put the V-Band clamp over the adapter before re-installing the O-Ring seal and the Race Port
Open the V-Band clamp and place in position. Tighten the V-Band clamp screw until it is finger tight then turn an additional 2.5
turns or 4 Nm (3 ft/lbs) with an allen key. Be sure not to over tighten the screw as this will cause damage to the V-Band clamp
Install the provided vacuum nipple into one of the ports in the top cap and install the blanking plug into the other.
Identify a standalone vacuum / pressure source from a port after the throttle body and connect with correctly sized hose to the
vacuum/boost port nipple on the cap of the Race Port. Ensure this line is as short as possible
Secure all silicone hose ends with correct clamps
Start the engine and check for air leaks in the system
RACE PORT DIAGRAM
Product Name:
RACE PORT
Product Description: Blow off valve
Product Number: TS-0204-11XX
Bolt head
Squeeze
Lift off
Pull down
Summary of Contents
Page 1
1 ------------------------------------------------------------------------------------------------------------------------ IMPORTANT NOTES ON YOUR R
Page 2
2 ACCESSORIES AND SPARE PARTS TS-0204-2001 BOV Race Port S/S Weld flange TS-0505-2007 1/16th NPT Male – 1/8 NPT Female fittings TS-0204-2104 BO
Page 3 - Happy motoring!
3 DO NOT USE ANY TURBOSMART PRODUCT UNTIL YOU HAVE CAREFULLY READ AND UNDERSTOOD THE FOLLOWING AGREEMENT. Please call if you have any question
Related products and manuals for For the car Turbosmart BLOW OFF VALVES - Race Port – Universal – New for
(4 pages)Brainboxes PM-121 manuales
Manuales del propietario y guías del usuario para Hardware Brainboxes PM-121.
Ofrecemos 1 manuales en pdf Brainboxes PM-121 para descargar gratis por tipos de documentos: Manual de usuario
Comments to this Manuals